What is Sway Bar?

Front Sway Bar Φ 28（FS-M0011）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Colt Plus / io / 2007-

Front Sway Bar Φ 22 1.6L（FS-M0002）Anti roll bar

for Lancer/Virage/CK  
 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer / 1996-1999

Front Sway Bar Φ 22 1.8L（FS-M0002＊18）Anti roll bar

for Lancer/Virage/CK
 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer / 1996-1999

Rear Sway Bar Φ 22 install with rear lower brace（FS-M0008）Anti roll bar

for Lancer/Virage/CK
 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer / 1996-1999

Rear Sway Bar Φ 22 for 2000~2003（FS-M0004）Anti roll bar

for EI/CS

 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer / 2000-2007

Rear Sway Bar Φ 22 for 2004（FS-M0005）Anti roll bar

for EI/CS

 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer / 2000-2007

Rear Sway Bar Φ 22 for 2005~2008（FS-M0006）Anti roll bar

for EI/CS

 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer / 2000-2007

Rear Sway Bar Φ 22 (for 2WD)（FS-M0003）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer / 2008-2017
• MITSUBISHI / Outlander / 2007-2014

Rear Sway Bar Φ 26 (for 2WD)（FS-M0003-1）Anti roll bar

for Fortis
 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer / 2008-2017
• MITSUBISHI / Outlander / 2007-2014

Rear Sway Bar Φ 22（FS-M0013）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer Sportback / 2014-

Rear Sway Bar Φ 26（FS-M0014）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Lancer Sportback / 2014-

Rear Anti-Sway Bar Φ 22 4WD（FS-M0012）Anti roll bar

CW5W
 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Outlander / 2007-2014

Rear Sway Bar Φ 26 4WD（FS-M0015）Anti roll bar

RE
 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Outlander / 2015
• MITSUBISHI / Outlander / 2017

Rear Sway Bar Φ 24（FS-M0001）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• MITSUBISHI / Savrin / 2000-2008

Front Sway Bar Φ 24（FS-N0003）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• NISSAN / Sentra / 2000-2006

Front Sway Bar Φ 26（FS-N0007）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• NISSAN / Teana / 2004-2008

Rear Sway Bar Φ 28（FS-N0006）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• NISSAN / Teana / 2004-2008

Rear Sway Bar Φ 22（FS-N0004）Anti roll bar

Teana 2.0 required to be purchased  ( original bushing kit*2 and sway bar link*2) separately.
 

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• NISSAN / Teana / 2009-

Rear Sway Bar Φ 22（FS-N0002）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• NISSAN / Q-RV / 2001-

Rear Sway Bar Φ 22（FS-N0005）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• NISSAN / Quest / 1995-1999
• NISSAN / Rogue / 2008-

Rear Sway Bar Φ 22（FS-N0001）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• NISSAN / X-Trail / 2002-

Rear Sway Bar Φ 22（FS-N0009）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• NISSAN / X-Trail / 2015-2020

Front Sway Bar Φ 23 for 1.4 & 1.6L（FS-P0001-1）Anti roll bar

1. Material:7050 Aluminum alloy precision machining 

2. One piece made 

3. Light weight: Only 1/3 of the same volume of iron products. 

4. Tensile strength could reach 60kg/ mm² or more. 

5. Small deformation. 

6. Prevents “vehicle body rolling” while cornering. 

7. Balance for neutral steering and precise turn-in response 

8. Reduce side-to-side body roll around turns. 

• PEUGEOT / 206